Part Number Hot Search : 
CM800 BF1202 50PI5 MPS650 MAX63 B37AD X9C503PI BZX85C10
Product Description
Full Text Search
 

To Download LM9036QMM-33NOPB Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  lm9036q www.ti.com snvs685b ? november 2010 ? revised march 2013 lm9036q ultra-low quiescent current voltage regulator check for samples: lm9036q 1 features description the lm9036q ultra-low quiescent current regulator 2 ? aec-q100 grade 1 qualified (-40 c to 125 c) features low dropout voltage and low current in the ? ultra low ground pin current (i gnd 25 a for standby mode. with less than 25 a ground pin i out = 0.1ma) current at a 0.1ma load, the lm9036q is ideally ? fixed 5v, 3.3v, 50ma output suited for automotive and other battery operated systems. the lm9036q retains all of the features that ? output tolerance 5% over line, load, and are common to low dropout regulators including a low temperature dropout pnp pass device, short circuit protection, ? dropout voltage typically 200mv @ i out = reverse battery protection, and thermal shutdown. 50ma the lm9036q has a 40v maximum operating voltage limit, a ? 40 c to +125 c operating temperature ? ? 45v reverse transient protection range, and 5% output voltage tolerance over the ? internal short circuit current limit entire output current, input voltage, and temperature ? internal thermal shutdown protection range. ? 40v operating voltage limit typical application * required if regulator is located more than 2 from power supply filter capacitor. ** required for stability. must be rated over intended operating temperature range. effective series resistance (esr) is critical, see electrical characteristics. locate capacitor as close as possible to the regulator output and ground pins. capacitance may be increased without bound. connection diagram figure 1. see package number d0008a figure 2. see package number dgk0008a top view top view these devices have limited built-in esd protection. the leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the mos gates. 1 please be aware that an important notice concerning availability, standard warranty, and use in critical applications of texas instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. 2 all trademarks are the property of their respective owners. production data information is current as of publication date. copyright ? 2010 ? 2013, texas instruments incorporated products conform to specifications per the terms of the texas instruments standard warranty. production processing does not necessarily include testing of all parameters.
lm9036q snvs685b ? november 2010 ? revised march 2013 www.ti.com absolute maximum ratings (1) (2) input voltage (survival) +55v, ? 45v esd susceptibility (3) 1.9kv power dissipation (4) internally limited junction temperature (t jmax ) 150 c storage temperature range ? 65 c to +150 c lead temperature (soldering, 10 sec.) 260 c (1) absolute maximum ratings indicate limits beyond which damage to the device may occur. dc and ac electrical specifications do not apply when operating the device beyond its specified operating ratings. (2) if military/aerospace specified devices are required, please contact the texas instruments sales office/ distributors for availability and specifications. (3) human body model, 100pf discharge through a 1.5k resistor. (4) the maximum power dissipation is a function of t jmax , ja , and t a . the maximum allowable power dissipation at any ambient temperature is p d = (t jmax ? t a )/ ja . if this dissipation is exceeded, the die temperature will rise above 150 c and the lm9036q will go into thermal shutdown. operating ratings operating temperature range ? 40 c to +125 c maximum input voltage (operational) 40v soic-8 (d0008a) ja (1) (2) 140 c/w soic-8 (d0008a) jc 45 c/w vssop-8 (dgk0008a) ja (1) 200 c/w (1) typical ja with 1 square inch of 2 oz. copper pad area directly under the ground tab. (2) worst case (free air) per eia / jesd51-3. electrical characteristics - lm9036q-5.0 v in = 14v, i out = 10 ma, t j = 25 c, unless otherwise specified. boldface limits apply over entire operating temperature range min typical max parameter conditions units (1) (2) (1) 4.80 5.00 5.20 output voltage (v out ) v 5.5v v in 26v, 4.75 5.00 5.25 0.1ma i out 50ma (3) i out = 0.1ma, 8v v in 24v 20 25 a i out = 1ma, 8v v in 24v 50 100 quiescent current (i gnd ) i out = 10ma, 8v v in 24v 0.3 0.5 ma i out = 50ma, 8v v in 24v 2.0 2.5 line regulation ( v out ) 6v v in 40v, i out = 1ma 10 30 mv load regulation ( v out ) 0.1ma i out 5ma 10 30 mv 5ma i out 50ma 10 30 mv dropout voltage ( v out ) i out = 0.1ma 0.05 0.10 v i out = 50ma 0.20 0.40 v short circuit current (i sc ) v out = 0v 65 120 250 ma ripple rejection (psrr) v ripple = 1v rms , f ripple = 120hz ? 40 ? 60 db output bypass capacitance 0.3 ? esr 8 ? 10 22 f (c out ) 0.1ma i out 50ma (1) tested limits are specified to aoql (average outgoing quality level) and 100% tested. (2) typicals are at 25 c (unless otherwise specified) and represent the most likely parametric norm. (3) to ensure constant junction temperature, pulse testing is used. 2 submit documentation feedback copyright ? 2010 ? 2013, texas instruments incorporated product folder links: lm9036q
lm9036q www.ti.com snvs685b ? november 2010 ? revised march 2013 electrical characteristics - lm9036q-3.3 v in = 14v, i out = 10 ma, t j = 25 c, unless otherwise specified. boldface limits apply over entire operating temperature range min typical max parameter conditions units (1) (2) (1) 3.168 3.30 3.432 output voltage (v out ) v 5.5v v in 26v, 3.135 3.30 3.465 0.1ma i out 50ma (3) i out = 0.1ma, 8v v in 24v 20 25 a i out = 1ma, 8v v in 24v 50 100 quiescent current (i gnd ) i out = 10ma, 8v v in 24v 0.3 0.5 ma i out = 50ma, 8v v in 24v 2.0 2.5 line regulation ( v out ) 6v v in 40v, i out = 1ma 10 30 mv load regulation ( v out ) 0.1ma i out 5ma 10 30 mv 5ma i out 50ma 10 30 mv dropout voltage ( v out ) i out = 0.1ma 0.05 0.10 v i out = 50ma 0.20 0.40 v short circuit current (i sc ) v out = 0v 65 120 250 ma ripple rejection (psrr) v ripple = 1v rms , f ripple = 120hz ? 40 ? 60 db output bypass capacitance 0.3 ? esr 8 ? 22 33 f (c out ) 0.1ma i out 50ma (1) tested limits are specified to aoql (average outgoing quality level) and 100% tested. (2) typicals are at 25 c (unless otherwise specified) and represent the most likely parametric norm. (3) to ensure constant junction temperature, pulse testing is used. copyright ? 2010 ? 2013, texas instruments incorporated submit documentation feedback 3 product folder links: lm9036q
lm9036q snvs685b ? november 2010 ? revised march 2013 www.ti.com typical performance characteristics dropout voltage quiescent current figure 3. figure 4. quiescent current quiescent current figure 5. figure 6. peak output current figure 7. 4 submit documentation feedback copyright ? 2010 ? 2013, texas instruments incorporated product folder links: lm9036q
lm9036q www.ti.com snvs685b ? november 2010 ? revised march 2013 applications information unlike other pnp low dropout regulators, the lm9036q remains fully operational to 40v. owing to power dissipation characteristics of the package, full output current cannot be ensured for all combinations of ambient temperature and input voltage. the junction to ambient thermal resistance ja rating has two distinct components: the junction to case thermal resistance rating jc ; and the case to ambient thermal resistance rating ca . the relationship is defined as: ja = jc + ca . while the lm9036q has an internally set thermal shutdown point of typically 150 c, this is intended as a safety feature only. continuous operation near the thermal shutdown temperature should be avoided as it may have a negative affect on the life of the device. the lm9036q maintains regulation to 55v, it will not withstand a short circuit above 40v because of safe operating area limitations in the internal pnp pass device. above 55v the lm9036q will break down with catastrophic effects on the regulator and possibly the load as well. do not use this device in a design where the input operating voltage may exceed 40v, or where transients are likely to exceed 55v. copyright ? 2010 ? 2013, texas instruments incorporated submit documentation feedback 5 product folder links: lm9036q
lm9036q snvs685b ? november 2010 ? revised march 2013 www.ti.com revision history changes from revision a (march 2013) to revision b page ? changed layout of national data sheet to ti format ............................................................................................................ 5 6 submit documentation feedback copyright ? 2010 ? 2013, texas instruments incorporated product folder links: lm9036q
package option addendum www.ti.com 13-sep-2014 addendum-page 1 packaging information orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples lm9036qm-3.3/nopb active soic d 8 95 green (rohs & no sb/br) cu sn level-1-260c-unlim -40 to 125 lm903 6qm-3 lm9036qm-5.0/nopb active soic d 8 95 green (rohs & no sb/br) cu sn level-1-260c-unlim -40 to 125 lm903 6qm-5 lm9036qmm-3.3/nopb active vssop dgk 8 1000 green (rohs & no sb/br) cu sn level-1-260c-unlim -40 to 125 kdbq lm9036qmm-5.0/nopb active vssop dgk 8 1000 green (rohs & no sb/br) cu sn level-1-260c-unlim -40 to 125 kdaq lm9036qmmx-3.3/nopb active vssop dgk 8 3500 green (rohs & no sb/br) cu sn level-1-260c-unlim -40 to 125 kdbq lm9036qmmx-5.0/nopb active vssop dgk 8 3500 green (rohs & no sb/br) cu sn level-1-260c-unlim -40 to 125 kdaq lm9036qmx-3.3/nopb active soic d 8 2500 green (rohs & no sb/br) cu sn level-1-260c-unlim -40 to 125 lm903 6qm-3 lm9036qmx-5.0/nopb active soic d 8 2500 green (rohs & no sb/br) cu sn level-1-260c-unlim -40 to 125 lm903 6qm-5 (1) the marketing status values are defined as follows: active: product device recommended for new designs. lifebuy: ti has announced that the device will be discontinued, and a lifetime-buy period is in effect. nrnd: not recommended for new designs. device is in production to support existing customers, but ti does not recommend using this part in a new design. preview: device has been announced but is not in production. samples may or may not be available. obsolete: ti has discontinued the production of the device. (2) eco plan - the planned eco-friendly classification: pb-free (rohs), pb-free (rohs exempt), or green (rohs & no sb/br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. tbd: the pb-free/green conversion plan has not been defined. pb-free (rohs): ti's terms "lead-free" or "pb-free" mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, ti pb-free products are suitable for use in specified lead-free processes. pb-free (rohs exempt): this component has a rohs exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. the component is otherwise considered pb-free (rohs compatible) as defined above. green (rohs & no sb/br): ti defines "green" to mean pb-free (rohs compatible), and free of bromine (br) and antimony (sb) based flame retardants (br or sb do not exceed 0.1% by weight in homogeneous material) (3) msl, peak temp. - the moisture sensitivity level rating according to the jedec industry standard classifications, and peak solder temperature.
package option addendum www.ti.com 13-sep-2014 addendum-page 2 (4) there may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) multiple device markings will be inside parentheses. only one device marking contained in parentheses and separated by a "~" will appear on a device. if a line is indented then it is a continuation of the previous line and the two combined represent the entire device marking for that device. (6) lead/ball finish - orderable devices may have multiple material finish options. finish options are separated by a vertical ruled line. lead/ball finish values may wrap to two lines if the finish value exceeds the maximum column width. important information and disclaimer: the information provided on this page represents ti's knowledge and belief as of the date that it is provided. ti bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. ti has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ti and ti suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall ti's liability arising out of such information exceed the total purchase price of the ti part(s) at issue in this document sold by ti to customer on an annual basis.
tape and reel information *all dimensions are nominal device package type package drawing pins spq reel diameter (mm) reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p1 (mm) w (mm) pin1 quadrant lm9036qmm-3.3/nopb vssop dgk 8 1000 178.0 12.4 5.3 3.4 1.4 8.0 12.0 q1 lm9036qmm-5.0/nopb vssop dgk 8 1000 178.0 12.4 5.3 3.4 1.4 8.0 12.0 q1 lm9036qmmx-3.3/nopb vssop dgk 8 3500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 q1 lm9036qmmx-5.0/nopb vssop dgk 8 3500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 q1 lm9036qmx-3.3/nopb soic d 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 q1 lm9036qmx-5.0/nopb soic d 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 q1 package materials information www.ti.com 26-mar-2013 pack materials-page 1
*all dimensions are nominal device package type package drawing pins spq length (mm) width (mm) height (mm) lm9036qmm-3.3/nopb vssop dgk 8 1000 210.0 185.0 35.0 lm9036qmm-5.0/nopb vssop dgk 8 1000 210.0 185.0 35.0 lm9036qmmx-3.3/nopb vssop dgk 8 3500 367.0 367.0 35.0 lm9036qmmx-5.0/nopb vssop dgk 8 3500 367.0 367.0 35.0 lm9036qmx-3.3/nopb soic d 8 2500 367.0 367.0 35.0 lm9036qmx-5.0/nopb soic d 8 2500 367.0 367.0 35.0 package materials information www.ti.com 26-mar-2013 pack materials-page 2



important notice texas instruments incorporated and its subsidiaries (ti) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per jesd46, latest issue, and to discontinue any product or service per jesd48, latest issue. buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. all semiconductor products (also referred to herein as ? components ? ) are sold subject to ti ? s terms and conditions of sale supplied at the time of order acknowledgment. ti warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in ti ? s terms and conditions of sale of semiconductor products. testing and other quality control techniques are used to the extent ti deems necessary to support this warranty. except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. ti assumes no liability for applications assistance or the design of buyers ? products. buyers are responsible for their products and applications using ti components. to minimize the risks associated with buyers ? products and applications, buyers should provide adequate design and operating safeguards. ti does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which ti components or services are used. information published by ti regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. reproduction of significant portions of ti information in ti data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. ti is not responsible or liable for such altered documentation. information of third parties may be subject to additional restrictions. resale of ti components or services with statements different from or beyond the parameters stated by ti for that component or service voids all express and any implied warranties for the associated ti component or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of ti components in its applications, notwithstanding any applications-related information or support that may be provided by ti. buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. buyer will fully indemnify ti and its representatives against any damages arising out of the use of any ti components in safety-critical applications. in some cases, ti components may be promoted specifically to facilitate safety-related applications. with such components, ti ? s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. nonetheless, such components are subject to these terms. no ti components are authorized for use in fda class iii (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. only those ti components which ti has specifically designated as military grade or ? enhanced plastic ? are designed and intended for use in military/aerospace applications or environments. buyer acknowledges and agrees that any military or aerospace use of ti components which have not been so designated is solely at the buyer ' s risk, and that buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. ti has specifically designated certain components as meeting iso/ts16949 requirements, mainly for automotive use. in any case of use of non-designated products, ti will not be responsible for any failure to meet iso/ts16949. products applications audio www.ti.com/audio automotive and transportation www.ti.com/automotive amplifiers amplifier.ti.com communications and telecom www.ti.com/communications data converters dataconverter.ti.com computers and peripherals www.ti.com/computers dlp ? products www.dlp.com consumer electronics www.ti.com/consumer-apps dsp dsp.ti.com energy and lighting www.ti.com/energy clocks and timers www.ti.com/clocks industrial www.ti.com/industrial interface interface.ti.com medical www.ti.com/medical logic logic.ti.com security www.ti.com/security power mgmt power.ti.com space, avionics and defense www.ti.com/space-avionics-defense microcontrollers microcontroller.ti.com video and imaging www.ti.com/video rfid www.ti-rfid.com omap applications processors www.ti.com/omap ti e2e community e2e.ti.com wireless connectivity www.ti.com/wirelessconnectivity mailing address: texas instruments, post office box 655303, dallas, texas 75265 copyright ? 2015, texas instruments incorporated


▲Up To Search▲   

 
Price & Availability of LM9036QMM-33NOPB

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X